281-787-6444

5850 San Felipe Suite 500 Houston, TX 77057

DYNEX DSX

The DYNEX DSX® is the next stage of our fully automated 4-plate ELISA processing system. This breakthrough technology has transformed labs and medical facilities across the country with its state of the art design, seamless automation and intuitive interface.

DSX® is a tried-and-tested automated open system capable of performing several assays per plate simultaneously, providing optimized efficiency and speed. The system uses a perfectly synchronized system to eliminate plate drift and ensure premium consistency across four different plate incubators. As a result, you can count on reliable quality while reaching peak performance speeds that once seemed unattainable.

The bar has been raised. Busy clinical and medium-throughput private and industrial labs require advanced automation that can handle virtually every ELISA immunoassay, all in a reliable, cost-effective package. Look no further than the DSX®.

4 independent plate incubators help manage testing workload with reduce labor, walk-away capability to maximize lab personnel efficiency.

The Worklist Load Wizard walks you through the process of setting up the DSX® worklist, graphically showing where to place reagents, samples, and places at the beginning of each run.

The DSX® delivers everything needed to ensure the rigorous, repeatable analyses required in critical applications including immunology, infectious disease, hormone, allergy, blood-chemistry, drugs-of-abuse testing, food safety, forensics and environmental testing.

For the past two years DYNEX DSX® has achieved 98.2% uptime when mean time between failure target is set at 250 days.

With over 3,500 DYNEX DSX® systems installed worldwide, DYNEX DSX® has been cited recently in 38 scientific journal publications for studies in blood borne pathogens, Quantiferon Gold Plus, autoimmune, sexually transmitted diseases, tick-borne diseases and others.

 

Dimensions Metric

Width: 106 cm

Depth: 91 cm

Height: 80 cm

Footprint: 0.98 sq m

Bench Weight: 136 kg (max.)

Ship Weight: 244 kg (max.)

Physical Specifications

Voltage: 100 – 240 V automatic conversion

Frequency: 50/60 Hz

Power Consumption: < 800 VA (online UPS recommended)

Power Supply Requirements

Photometric Range: 0.000 – 3.000 OD

Spectral Range: 405 nm – 690 nm

Filter Slots: 6 wavelength

Precision: ± 0.010 OD at 0.000 – 0.500 OD

< 1% CV at 0.501 – 2.000 OD

< 1.5% at 2.001 – 2.500 OD

Accuracy: ± 0.01 OD or 2.5%

(0.000 – 3.000 OD) whichever is greater

Read Time: < 10 seconds, single wavelength

< 20 seconds, dual wavelength

Reader Specifications

Manifold Configuration: 8-way

Programmable Volumes: 50 µL – 999 µL

Wash Buffer Capacity: 4 wash bottles at 2.0 L, with level-sensing

Residual Wash Volume: < 3 ?L per well with a dual-axis sweep in a

at-bottom plate

Dispense Precision: ? 5% CV (with 300 ?L in a 96-well plate)

Waste Container: 8 L with waste full sensor

Washer Specifications

Number of Plates: 4

Sample Capacity: 96 (98 positions available)

Continuous Sample Loading: Yes

Sample Tube Size: 10 mm – 16 mm diameter

40 mm – 100 mm height

Number of Reagents: Up to 24 (25 mL tubes)

Number of

Standard/Control Bottles: 33 (1.5 mL vials)

Assays per Plate: 1 assay per strip or up to 12 assays per plate

Dilution Wells Capacity: Up to 192 deep-well strips (24 x 8)

Sample Tip Capacity: 432 (4 x 108)

Reagent Tip Capacity: 41 tips

System Specifications

Sample Tip Size: 300 ?L

Sample Pipetting Volume: 10 ?L – 250 ?L single-shot

25 ?L – 100 ?L multi-shot

Sample Pipetting Precision: ? 3% CV at any operating volume above

10 ?L (single-shot mode)

Sample Pipetting Accuracy: ± 2% of target volume at any operating

volume above 10 ?L (single-shot mode)

Estimated Cycle Time for Sample

Pickup to Delivery on Plate: < 8 seconds^

Time to Dispense: 19 minutes (typical)^

50 ?L of 96 samples to plate from sample

tubes or deep-well plates

Sampling Time w/Dilutions: < 26 minutes (typical)^

Dilution Range: 1 part in 190 one-stage dilution

1 part in 36,100 two-stage dilution

Sample Pipetting Specications

Liquid Level Sensing: Yes (reagents, controls and samples)

Level Sensor System: Pressure dierential

Clot Detection: Yes

Dispense Anomaly Detection: Yes

Tip Detection: Yes

Electronic Signature Pipetting: Yes

Alarms: Yes

Process Security

Controlling Software: REVELATION DSX®

Work Protocols (Assays): Unlimited

Data Processing: Quantitative and qualitative

Levey-Jennings: Yes

Westgard Rules: Yes

Process Reporting: Event log + error log

Automatic Error Recovery: Yes

Password Access Control: Yes

Software

Reagent Tip Size: 1,300 µL

Reagent Pipetting Volume: 25 ?L – 1,000 µL

Reagent Pipetting Precision: ? 3% CV at 10 shots at any volume in

the operating range above 50 µL

Reagent Pipetting Accuracy: ± 2% of target volume at 50 µL or greater

in operating range (single-shot mode)

Reagent Pipetting Specications

Number of Incubators: Up to 4

Temperature Range: RT + 7° C to 50° C (elevated incubator)

RT + 5° C (ambient incubator)

Temperature Accuracy: ± 1° C

Shaking: > 15 Hz periodic or continuous

Temperature Monitoring: Yes

Related Products